Powder coating has become one of the most common methods that makes metal more aesthetically appealing while at the same time adding some features to the metal that enhances its features compared to the original metal. The process involves using static electricity and heat to create a smooth layer and also make the metal less susceptible to corrosion. However, powder coating is not always an automatic process like many people assume it to be. There are ways you can achieve that perfect finish but when not done professionally, the entire process becomes flawed. It is important that you follow a certain process that will guarantee you that perfect finish. Without this, then the metal will not appear any different from what it originally was. Remember, there are still people are still wondering what powder coatings are and how they are different from liquid coatings. One of the reasons to rely on powder coatings is that it protects the component you are using for that professional finish. When choosing a liquid coating service or a powder coating concord ca, choose a vendor who has industrial certification as well as one who is flexible and innovative. Of course there are many powder coating bay area services and once you have identified the right one, below are ways of getting a professional finish.
Take your Product Apart
Perhaps you are wondering-what are powder coatings and how can I get the best finish? Well, one of the ways of achieving this is by taking your product apart. You cannot expect your product to have the best aesthetic finish if it still intact. An intact product means that you will not be able to fully access all the areas during the process. Carefully take your product part to ensure that all the areas have a uniform and even look. Taking the product apart also has another benefit. Since you are using heat, there are certain pieces within the product that are susceptible to melting. Such pieces include plastic and metallic pieces. You can remove these pieces before you start the process just to make sure that they do not get damaged during powder coating. Whereas many people would still ask what are powder coatings, the process is less complicated as long as you know the basic. The perfect finish does not automatically just happen but at the same time, following the right procedure ensures that the final product is flawless.
Carefully Clean Your Products
If you want to have the perfect finish, then always make sure that your products are fully clean. This way, you are able to remove small particles that may have an effect on the eventual powder coat. When you have blemishes on the surface of your product, then it eliminates the need to have the coat at all since the idea of powder coating is to enhance the aesthetic appeal. First, you start by removing grease and dirt on the product that you want to apply the powder coat on. You can use any form of de-greaser to remove grease from the surface. However, you should make sure that the de-greaser has no effect on the metal you are using. Secondly, the paint on the product you want to have the powder coat on should be removed using any paint remover. Similarly, the paint remover should have no effect on the metal you are using. Lastly, sandblast the product to ensure that the surface is even and consistent before you begin the process.
Choose and Apply Your Coating
Many people often find themselves wondering what are powder coatings? After outlining the process, it is now time for you to apply your coating. This begins by choosing the right base coat. Since there are many primers to choose from, choose one that is right for your metal and then apply a top coat. The best thing about powder coating is that it introduces a variety of styles to your top coat. The next time you are wondering what are powder coatings, all you need to do is to understand the basics of the process that will give your product that perfect finish.